LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Wiper/Washer System) >> Wiper And Washer Switch Inspection >> Windshield Washer Switch

Windshield Washer Switch

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
  2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
  3. Remove the wiper and washer switch. (See WIPER AND WASHER SWITCH REMOVAL/INSTALLATION .)
  4. Verify that the continuity between the wiper and washer switch terminals is as indicated in the table.
    Fig 1: Wiper And Washer Switch Terminals Continuity Chart (1 Of 2)
    G11453122Courtesy of MAZDA MOTORS CORP.
    Fig 2: Wiper And Washer Switch Terminals Continuity Reference Chart (2 Of 2)
    G11453121Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals