LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (On-Board Diagnostic - Engine Control (2 Of 5)) >> DTC B10A2; Pcm Vehicle Collision >> Repeatability Verification Procedure

Repeatability Verification Procedure

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch the ignition ON and leave for 5 s or more.
  2. Clear the DTC from the PCM memory using the M-MDS. (See CLEARING DTC [PCM (SKYACTIV-G 2.0, SKYACTIV-G 2.5)] .)
  3. After switching the ignition off, switch the ignition back ON and leave for 5 s or more.
  4. Using the M-MDS, display DTCs and verify that DTC U0151:00 is not displayed. (See ON-BOARD DIAGNOSTIC TEST [PCM (SKYACTIV-G 2.0, SKYACTIV-G 2.5)] .)
scientia non olet · About LEMON Manuals