Section 95 (On-Board Diagnostic - Engine Control (1 Of 5))
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Foreword
- INAPPROPRIATE OPERATION AND CONTROL RECORD 0x30 (TEMPERATURE RESTRICTION CONTROL)
- INAPPROPRIATE OPERATION AND CONTROL RECORD 0x42 (UNUSUAL CONNECTION WITH A GENERATOR)
- INAPPROPRIATE OPERATION AND CONTROL RECORD 0x43 (UNUSUAL VOLTAGE OF A BATTERY OR CAPACITOR)
- Inappropriate Operation And Control Record
- KOEO/KOER Self Test
- OBD-II Drive Mode
- OBD-II Freeze Frame Data
- OBD-II On-Board System Readiness Test
- OBD-II Parameter Identification (PID) Access
- OBD-II Pending Trouble Code
- OBD-II Read/Clear Diagnostic Test Results
- On-Board Diagnostic Test
- DTC Reading Procedure
- Pending Trouble Code Access Procedure
- Freeze Frame PID Data Access Procedure
- Freeze frame data
- Snapshot data
- Freeze frame data table
- Snapshot data table
- On-Board System Readiness Tests Access Procedure
- PID/DATA Monitor and Record Procedure
- Diagnostic Monitoring Test Results Access Procedure
- Active Command Modes Procedure