Evaporative Chamber Inspection

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Remove the evaporative chamber. (See EVAPORATIVE CHAMBER REMOVAL/INSTALLATION .)
Blow air flow port A and verily that there is air flow.

Fig 1: Evaporative Chamber Blow Air Flow Port A
Courtesy of MAZDA MOTORS CORP.
- If there is no air flow, replace the evaporative chamber. (See EVAPORATIVE CHAMBER REMOVAL/INSTALLATION .)
Verily that there is no deformation or cracking of the evaporative chamber.
- If the exterior is no normal, replace the evaporative chamber. (See EVAPORATIVE CHAMBER REMOVAL/INSTALLATION .)