Function Inspection Using M-MDS
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
| STEP | INSPECTION | RESULTS | ACTION |
|---|---|---|---|
| 1 | VERIFY RELATED REPAIR INFORMATION AVAILABILITY
|
Yes | Perform repair or diagnosis according to the available repair information.
|
| No | Go to the next step. | ||
| 2 | PURPOSE: VERIFY IF BATTERY VOLTAGE IS FALSELY RECOGNIZED BY DTC RELATED CURRENT SENSOR
|
Yes | Go to the applicable PENDING CODE or DTC inspection. (See DTC P058A:00 [PCM (SKYACTIV-G 2.0, SKYACTIV-G 2.5)] .) Go to the next step. |
| No | Go to the next step. | ||
| 3 | PURPOSE: VERIFY IF BATTERY VOLTAGE IS FALSELY RECOGNIZED BY DTC RELATED CAN OR LIN COMMUNICATION
|
Yes | Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [PCM (SKYACTIV-G 2.0, SKYACTIV-G 2.5)] .) (See DTC TABLE [FRONT BODY CONTROL MODULE (FBCM)] .) Go to the next step. |
| No | Go to the next step. | ||
| 4 | PURPOSE: VERIFY DTC
|
Yes | Replace the battery. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .) Go to the troubleshooting procedure to perform the procedure from Step 2. |
| No | Go to the troubleshooting procedure to perform the procedure from Step 1. |