LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Exterior Body Panels) >> FRONT FENDER INSULATOR No. 1 REMOVAL/INSTALLATION

FRONT FENDER INSULATOR No. 1 REMOVAL/INSTALLATION

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front mudguard. (See MUDGUARD REMOVAL/INSTALLATION .)
  2. Remove the front fender insulator No. 1 boss area from the hole of the cowl side reinforcement.
    Fig 1: Locating Cowl Side Reinforcement Flange Area
    G11447567Courtesy of MAZDA MOTORS CORP.
  3. Pull out front fender insulator No. 1 from the cowl side reinforcement flange area.
  4. Remove front fender insulator No. 1.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals