LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Auxiliary Jack/USB Port Inspection >> Auxiliary jack inspection

Auxiliary jack inspection

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Console up (See REAR CONSOLE REMOVAL/INSTALLATION .)
    2. Auxiliary jack/USB port (See AUXILIARY JACK/USB PORT REMOVAL/INSTALLATION .)
  3. Connect a commercially-available plug to the auxiliary jack/USB port.
    Fig 1: Connecting Commercially-Available Plug To Auxiliary Jack/USB Port
    G09077749Courtesy of MAZDA MOTORS CORP.
  4. Verify that the continuity between the auxiliary jack/USB port terminals is as indicated in the table.
    Fig 2: Auxiliary Jack/USB Port Terminals Continuity Chart
    G09077748Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, replace the auxiliary jack/USB port.
scientia non olet · About LEMON Manuals