Front Map Light Inspection

Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
Remove the front map light. (See FRONT MAP LIGHT REMOVAL/INSTALLATION .)
Verify that the continuity between the front map light terminals is as indicated in the table.

Fig 1: Front Map Light Terminals Continuity Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Front Map Light Switch Circuit
Courtesy of MAZDA MOTORS CORP.
- If not as indicated in the table, replace the front map light bulb or the front map light. (See FRONT MAP LIGHT BULB REMOVAL/INSTALLATION .) (See FRONT MAP LIGHT REMOVAL/INSTALLATION .)