LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels >> Cowl Panel Removal/Installation

Cowl Panel Removal/Installation

  1. Disconnect the negative battery terminal.(See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Windshield wiper arm and blade (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION .)
    2. Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION .)
    3. Windshield wiper motor and link (See WINDSHIELD WIPER MOTOR AND LINK REMOVAL/INSTALLATION .)
    4. Keyless beeper (See KEYLESS BEEPER REMOVAL/INSTALLATION .)
  3. Disconnect the wiper deicer connector. (with wiper deicer) (See WINDSHIELD REMOVAL .)
  4. Remove the clips
  5. Remove the bolts.
    Fig 1: Removing Cowl Panel Bolts And Clips
    G11412470Courtesy of MAZDA MOTORS CORP.
  6. Remove the coul panel.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals