Diagnostic Procedure

Step	Inspection		Action
1	CONFIRM Bluetooth® UNIT DTC Clear the DTC from the Bluetooth® unit memory. (See CLEARING DTC [AUDIO] .) Perform the Bluetooth® unit DTC inspection. (See DTC INSPECTION [AUDIO] .) Is the same DTC present?	Yes	Replace the Bluetooth® unit, then go to the next step. (See BLUETOOTH® UNIT REMOVAL/INSTALLATION .)
1		No	Go to the next step.
2	VERIFY THAT NO OTHER DTCs ARE RECORDED Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [AUDIO] .)
2		No	DTC troubleshooting completed.