LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Sport, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels And Bumpers >> Rear Bumper Disassembly/Assembly >> Notes

Rear Bumper Disassembly/Assembly: Notes

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Rear combination light (See REAR COMBINATION LIGHT REMOVAL/INSTALLATION .)
    2. Rear splash shield (See SPLASH SHIELD REMOVAL/INSTALLATION .)
    3. Rear bumper (See REAR BUMPER REMOVAL/INSTALLATION .)
  3. Disassemble in the order indicated in the table.
    Fig 1: Rear Bumper Component Removal Order
    G08152744
  4. Assemble in the reverse order of disassembly.
scientia non olet · About LEMON Manuals