Seat Weight Sensor Inspection [Two-Step Deployment Control System]
CAUTION:
- If any of the following work is performed, perform the seat weight sensor inspection using the M-MDS.
- Removal of the passenger-side seat
- Loosening and retightening of passenger's seat fixing bolts
- Or, the vehicle is involved in a collision
- If any of the following work is performed, perform the seat weight sensor calibration using the M-MDS. (See SEAT WEIGHT SENSOR CALIBRATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM] .)
- Replacement with a new seat weight sensor
- Replacement with a new seat weight sensor control module
- Replacement with new passenger-side seat parts
- Disassembly of the passenger-side seat
- Connect the M-MDS (IDS) to the DLC-2.
- After the vehicle is identified, select the following items from the initialization screen of the IDS.
- Select "Body".
- Select "Restraints".
- Then, select item from the screen menu in the following order.
- Select "Passenger Seat Weight Sensor ReZero".
- Then, select item from the SWS Calibration screen menu in the following order.
- Select the "(2)-When the passenger seat was removed and reinstalled."
- Perform inspection following the procedures on the M-MDS screen.