LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 492 (Engine Mechanical (Service Information)) >> Engine Tune-Up >> Idle Speed Adjustment

Idle Speed Adjustment

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform ENGINE TUNE-UP PREPARATION .
  2. Verify that the idle speed is within the specification.
    • If not within the specification, adjust the idle speed by turning the AAS.
    CAUTION:
    • The TAS is set at the factory and must not be adjusted. Any adjustment will negatively affect the engine performance.
    Fig 1: Adjusting Idle Speed By Turning AAS
    G03637715Courtesy of MAZDA MOTORS CORP.

    Specification 

    1. 750-850 (800 +/- 50) RPM 
  3. Disconnect the jumper wire.
  4. Press "CLEAR" to clear previously selected items.
  5. Disconnect the SST  (WDS or equivalent).
scientia non olet · About LEMON Manuals