LYSHOLM Compressor (MILLENIA 2.3L): Removal
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Remove upper intake manifold. See REMOVAL & INSTALLATION (MILLENIA 2.3L) under UPPER INTAKE MANIFOLD.
- Disconnect vacuum lines and harness connector from fuel distributor assembly. Remove air intake pipe assembly. Remove Charge Air Cooler (CAC) pipe from intake manifold. Drain coolant from radiator. Remove coolant hoses from By-Pass Air Control (BAC) valve and remove valve. Remove water pipe.
- Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect negative battery cable. Disconnect fuel line. Remove intake manifolds. Remove throttle body from compressor. Loosen and remove drive belt. Remove Lysholm compressor.