Removal & Installation (Millenia 2.3L)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Remove dynamic chamber cover. Remove Charge Air Cooler (CAC) air duct and air cleaner assembly. Remove fresh air duct and connecting air duct. Remove Mass Airflow (MAF) sensor and air intake hose.
- Remove air resonator. Remove right and left CACs with connecting hoses (if needed) from air intake pipe assembly. Disconnect accelerator cable. Remove EGR valve. Disconnect vacuum lines and harness connector from upper intake manifold assembly. Remove upper intake manifold assembly.
- To install, replace upper intake manifold gasket (if necessary). Install upper intake manifold bolts/nuts and tighten in crisscross pattern to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.