LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Engine Mechanical - Overhaul - (AJ W/O VVT)) >> Timing Chain Disassembly >> Chain TENSIONER (LH) Disassembly Note

Chain TENSIONER (LH) Disassembly Note

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 Mazda MPV, 2005 Mazda MPV, 2004 Mazda MPV, 2004 Mazda 6, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before removing chain tensioner (LH), turn the crankshaft clockwise 1 and 2/3 turns  to position the crankshaft keyway in the 11 o'clock  position. (camshafts (LH) are in the neutral position.)
    Fig 1: Positioning Crankshaft Keyway In 11 O'clock Position
    G02831110Courtesy of MAZDA MOTORS CORP.
  2. Press and hold the tensioner piston by following Step 4 to 6 in Chain Tensioner (RH) Disassembly Note. (See CHAIN TENSIONER (RH) DISASSEMBLY NOTE .)
scientia non olet · About LEMON Manuals