LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical (Service Information MZR 2.5) >> Engine Mechanical Tune-Up >> Ignition Timing Inspection

Ignition Timing Inspection

NOTE:
  • The ignition timing cannot be adjusted.
  • The M-MDS is required to verify the ignition timing.
  1. Complete the engine tune-up preparation. (See ENGINE TUNE-UP PREPARATION .)
  2. Verify the ignition timing (M-MDS: SPARKADV) using the PID/data monitor function of the M-MDS. (See PCM INSPECTION .)

    Ignition timing 

    • Approx. BTDC 12°
  3. Verify that ignition timing advances when the engine speed increases gradually.
scientia non olet · About LEMON Manuals