LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical (Service Information MZR 2.5) >> Engine Mechanical Tune-Up >> Engine Tune-up Preparation

Engine Tune-up Preparation

  1. Verify the following:
    • MTX: Shift lever is in neutral position.
    • ATX: Selector lever is in P or N position.
  2. Warm up the engine to normal operating temperature.
    1. Increase the engine speed to 2,500-3,000 rpm  until the cooling fan starts running.
    2. When the cooling fan starts running, release the accelerator pedal and wait until the cooling fan stops running.
  3. Turn off all electrical loads.
  4. Connect the M-MDS to the DLC-2.
scientia non olet · About LEMON Manuals