LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Doors And Liftgate >> Sliding Door Removal/Installation >> Notes

Sliding Door Removal/Installation: Notes

WARNING:
  • If the sliding door removal/installation is performed by one person, the sliding door could fall down and serious injury may occur. Always perform the procedure with at least another person to prevent the sliding door from falling down.
  1. Disconnect the negative battery cable.
  2. Remove the rear combination light. (See REAR COMBINATION LIGHT REMOVAL/INSTALLATION .)
  3. Remove the rear scuff plate. (See REAR SCUFF PLATE REMOVAL/INSTALLATION .)
  4. Remove in the order indicated in the figure.
    Fig 1: Sliding Door Components And Torque Specifications
    G08152765
  5. Install in the reverse order of removal.
  6. Adjust the sliding door. (See DOOR ADJUSTMENT .)