LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Lighting System >> Sliding Door Switch Inspection

Sliding Door Switch Inspection

  1. Disconnect the negative battery cable.
  2. Remove the sliding door switch. (See SLIDING DOOR SWITCH REMOVAL/INSTALLATION .)
  3. Verify that the continuity between the sliding door switch terminal and the body ground is as indicated in the table.
    Fig 1: Identifying Sliding Door Switch Terminal And Body Ground
    G08153378
    • If not as indicated in the table, replace the sliding door switch.
    Fig 2: Sliding Door Switch Terminal And Body Ground Continuity Chart
    G08153379
scientia non olet · About LEMON Manuals