LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Lighting System >> Sliding Door Switch Removal/Installation

Sliding Door Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the screw.
    Fig 1: Identifying Sliding Door Switch, Connector And Screw
    G08153377
  3. Remove the sliding door switch.
  4. Disconnect the connector.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals