LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> On-Board Diagnostic [Audio] >> Supplier Identification Procedure [Audio] >> Identification Using the Label or Inscribed Lettering

Identification Using the Label or Inscribed Lettering

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Side wall (See SIDE WALL REMOVAL/INSTALLATION .)
    2. Center console box (See CENTER CONSOLE BOX REMOVAL/INSTALLATION .)
    3. Console panel (See CONSOLE PANEL REMOVAL/INSTALLATION .)
    4. Center console (See CENTER CONSOLE REMOVAL/INSTALLATION .)
    5. Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [G66M-R] .)
    6. Selector lever knob (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
    7. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)
    8. Front console (See FRONT CONSOLE REMOVAL/INSTALLATION .)
    9. Climate control unit (See CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER] .)
    10. Upper column cover (See COLUMN COVER REMOVAL/INSTALLATION .)
    11. Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .)
    12. Switch panel (See SWITCH PANEL REMOVAL/INSTALLATION .)
    13. Audio unit (See AUDIO UNIT REMOVAL/INSTALLATION .)
  3. Verify the supplier by referring to the label attached to each unit.
    Fig 1: Identifying Supplier Identification Label
    G08152582
scientia non olet · About LEMON Manuals