LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 620 (Interior Trim) >> Knee Bolster Removal/Installation

Knee Bolster Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the lower panel. See LOWER PANEL REMOVAL/INSTALLATION .
  2. Remove the bolt.
    Fig 1: Lnee Bolster With Mounting Bolts Torque Specifications
    G06199457Courtesy of MAZDA MOTORS CORP.
  3. Remove the knee bolster.
  4. Install in the reverse order of removal.