LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 607 (Washer System & Wiper System) >> Windshield Washer Nozzle Removal/Installation

Windshield Washer Nozzle Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the windshield wiper arm and blade. See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION .
  2. Remove the cowl grille. See COWL GRILLE REMOVAL/INSTALLATION .
  3. Remove the windshield washer hose from the windshield washer nozzle.
  4. Squeeze the tabs of the windshield washer nozzle.
  5. Pull the windshield washer nozzle out to remove it.
  6. Install in the reverse order of removal.
    Fig 1: Identifying Windshield Washer Nozzle
    G06199543Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals