Windshield Washer Motor Inspection

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable
Remove the front mudguard (RH). See FRONT MUDGUARD REMOVAL/INSTALLATION .
Disconnect the windshield washer motor connector.
After connecting washer motor terminal A to the positive battery terminal, and terminal B to the negative battery terminal, verify that washer fluid flows to the windshield washer hose.
- If there is any malfunction, replace the windshield washer motor.
  
  Fig 1: Identifying Windshield Washer Motor Connector Terminal
  Courtesy of MAZDA MOTORS CORP.