LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 604 (Seat System) >> Rear Side Seat Back Removal/Installation

Rear Side Seat Back Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat cushion. See REAR SEAT CUSHION REMOVAL/INSTALLATION .
  2. Remove the bolt.
    Fig 1: Rear Side Seat Back With Mounting Bolts Torque Specifications
    G06200838Courtesy of MAZDA MOTORS CORP.
  3. Remove the rear side seat back, while remove the tab in the indicated of arrow shown in the figure.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals