LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 603 (Body System [Body Panels]) >> Fuel-Filler Lid Removal/Installation

Fuel-Filler Lid Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolts.
    Fig 1: Fuel-Filler Lid Mounting Bolts Torque Specifications
    G06200664Courtesy of MAZDA MOTORS CORP.
  2. Remove the fuel filler lid in the direction of the arrow shown in the figure.
  3. Install in the reverse order of removal.
  4. Adjust the fuel-filler lid. See FUEL-FILLER LID ADJUSTMENT )
scientia non olet · About LEMON Manuals