LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 603 (Body System [Body Panels]) >> Fuel-Filler Lid Adjustment

Fuel-Filler Lid Adjustment

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the gap and height difference between the fuel-filler lid and the body.
  2. Loosen the fuel-filler lid installation bolts and adjust the fuel-filler lid.

    Standard clearance 

    1. 1.7-3.7 mm {0.07-0.14 in} 
    2. -0.5-1.5 mm {-0.01-0.05 in} 
  3. Tighten the bolts.
    Fig 1: Identifying Gap And Height Difference Between Fuel-Filler Lid And Body
    G06200665Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals