LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (Security System And Locks System) >> Fuel-Filler Lid Opener And Lever Removal/Installation >> Fuel-filler Lid Opener Lever

Fuel-filler Lid Opener Lever

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel-filler lid opener bezel. (See FUEL-FILLER LID OPENER BEZEL REMOVAL/INSTALLATION .)
  2. Remove the bolts
    3. Fig 1: Fuel-Filler Lid Opener Lever & Bolts With Torque Specifications
    G06200891Courtesy of MAZDA MOTORS CORP.
  3. Disconnect the cable and fuel-filler lid opener lever.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals