LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 572 (Engine Mechanical [Lubrication System MZI-3.7)) >> Engine Oil Replacement [MZI-3.7] >> Engine oil specification

Engine oil specification

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE OIL SPECIFICATION CHART

Item U.S.A. and CANADA Except U.S.A. and CANADA
Engine oil grade
G06204923Courtesy of MAZDA MOTORS CORP.
G06204924Courtesy of MAZDA MOTORS CORP.
Engine oil viscosity 5W-20 5W-20 (If SAE 5W-20 engine oil is not available in your market, use SAE 5W-30 engine oil.

Engine oil capacity (approx. quantity) 

Oil replacement: 4.7 L {5.0 US qt, 4.1 Imp qt} 

Oil and oil filter replacement: 5.2 L {5.5 US qt, 4.6 Imp qt} 

Total (dry engine): 5.7 L {6.0 US qt, 5.0 Imp qt} 

  1. 8. Install the oil filler cap.
  2. 9. Start the engine and confirm that there is no oil leakage.
    • If there is oil leakage, repair or replace the applicable part.
  3. 10. Inspect the oil level. See ENGINE OIL LEVEL INSPECTION [MZI-3.7] .