LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 572 (Engine Mechanical [Lubrication System MZI-3.7)) >> Engine Oil Level Inspection [MZI-3.7]

Engine Oil Level Inspection [MZI-3.7]

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the vehicle on level ground.
  2. Warm up the engine.
  3. Stop the engine and allow at least 5 min before continuing.
  4. Remove the dipstick, wipe it cleanly, and reinstall it fully.
  5. Remove the dipstick and verify that the oil level is between the F and L marks on the dipstick.
    • If the oil level is below the L mark, add to raise the level within the hatching zone.
    Fig 1: Identifying Oil Level Between F And L Marks On Dipstick
    G06204922Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals