Back-Up Light Switch Removal/Installation [G66M-R]
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Remove the aerodynamic under cover No 2. See AERODYNAMIC UNDER COVER NO. 2 REMOVAL/INSTALLATION .
- Drain the oil from the transaxle
- Disconnect the back-up light switch connector and remove the back-up light switch.
- Install in the reverse order of removal
- Add the specified amount and type of oil. See TRANSAXLE OIL REPLACEMENT [G66M-R] )
- Install the aerodynamic under cover No. 2. See AERODYNAMIC UNDER COVER NO 2 REMOVAL/INSTALLATION .