Instrument Cluster

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the INSTRUMENTATION/DRIVER INFO. PERSONALIZATION FEATURES SETTING PROCEDURE.

Connect the M-MDS to the DLC-2.
After the vehicle is identified, select the following items from the initial screen of the M-MDS.
1. Select the "Module Programming".
Then, select items from the screen menu in the following order.
1. Select "Programmable Parameters"
2. Select "Warning Lamps/Chimes".

Select an item name, and then select option

Fig 1: Identifying M-MDS To DLC-2

Courtesy of MAZDA MOTORS CORP.

CONTROL UNIT CHART

M-MDS display	Function	Initial setting	Setting content	Control unit
Welcome Mode	The welcome mode can be set to operable or inoperable	Enabled	Disabled/Enabled	Instrument cluster
Outside Air Temperature	The ambient temperature display unit can be changed.	Celsius	Celsius/Fahrenheit	Instrument cluster
Decoration Illumination	The instrument cluster illumination can be set to operable or inoperable.	Disabled	Disabled/Enabled	Instrument cluster
Headlamp reminder buzzer	The headlights-on reminder warning alarm can be set to operable or inoperable.	Disabled	Disabled/Enabled	Instrument cluster
Turn signal buzzer volume	The turn indicator beeper sound volume can be adjusted.	Normal	Normal/Small	Instrument cluster

CAUTION:

The M-MDS screen displays the following items, however, do not change the setting. If the setting is changed, a difference occurs between the instrument cluster indication and actual fuel level leading to unexpected fuel shortage.

CONTROL UNIT CHART

M-MDS display	Function	Initial setting	Setting content	Control unit
Fuel Response Data	The response timing of the remaining distance to empty corresponding to the remaining fuel can be selected	Level 6	Level 1-16	Instrument cluster