Blind Spot Monitoring (BSM) System

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the INSTRUMENTATION/DRIVER INFO. PERSONALIZATION FEATURES SETTING PROCEDURE.

Connect the M-MDS to the DLC-2.
After the vehicle is identified, select the following items from the initial screen of the M-MDS.
1. Select the "Module Programming".
Then, select items from the screen menu in the following order.
1. Select "Programmable Parameters".
2. Select "Personality".

Select an item name, and then select option.

Fig 1: Identifying M-MDS To DLC-2

Courtesy of MAZDA MOTORS CORP.

CONTROL UNIT CHART

M-MDS display	Function	Initial setting	Setting content	Control unit
BSM buzzer	The BSM warning alarm sound can be set to operable or inoperable.	Enabled	Disabled/Enabled	BSM control module