LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 549 (Engine Mechanical [Service Information L5]) >> Drive Belt Removal/Installation [L5]

Drive Belt Removal/Installation [L5]

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the front mudguard (RH) out of the way. (See FRONT MUDGUARD REMOVAL/INSTALLATION .)
  2. Remove the splash shield (RH).
  3. Rotate the drive belt auto tensioner in the direction shown in the figure and remove the drive belt.
    4. Fig 1: Rotating Drive Belt Auto Tensioner
    G04859452Courtesy of MAZDA MOTORS CORP.
  4. Install the drive belt.
  5. Install the splash shield (RH).
  6. Install the front mudguard (RH). (See FRONT MUDGUARD REMOVAL/INSTALLATION .)
scientia non olet · About LEMON Manuals