LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Control System [HVAC - Full Auto Air Conditioner) >> Climate Control Unit Removal/Installation [Full-Auto Air Conditioner]

Climate Control Unit Removal/Installation [Full-Auto Air Conditioner]

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION .)
    2. Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .)
    3. Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM LOCATION INDEX .)
    4. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)
    5. Center panel lower (See CENTER PANEL LOWER REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
    PARTS DESCRIPTION CHART

    1 Screw
    2 Connector
    3 Climate control unit
  4. Disconnect the climate control unit connectors and remove the climate control unit.
  5. Install in the reverse order of removal.
    Fig 1: Climate Control Unit With Connector And Screw
    G07621397Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals