LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Emission System [MZR 2.5]) >> Evaporative Chamber Inspection

Evaporative Chamber Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Remove the evaporative chamber. (See EVAPORATIVE CHAMBER REMOVAL/INSTALLATION .)
  2. Plug the port C.
  3. Verify that there is air flow from port B when pressure is applied to port A.
  4. Remove the plug of port C.
    Fig 1: Evaporative Chamber Ports And Plugs
    G06205091Courtesy of MAZDA MOTORS CORP.
  5. Plug the port B.
  6. Verify that there is air flow from port C when pressure is applied to port A.
  7. Remove the plug of port B.
    Fig 2: Evaporative Chamber Ports And Plugs
    G06205092Courtesy of MAZDA MOTORS CORP.
  8. Verify that there is air flow when vacuum is applied to port A.
Fig 3: Evaporative Chamber Ports
G06205093Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals