LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Emission System [MZR 2.5]) >> Evaporative Chamber Removal/Installation

Evaporative Chamber Removal/Installation

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.5] .)
  2. Remove the evaporative chamber.
  3. Install in the reverse order of removal.
Fig 1: Evaporative Chamber, Fuel-Filler Pipe And Evaporative Chamber
G07620619Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals