LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical (Service Information MZR 2.5)) >> Engine Tune-Up >> Ignition Timing Inspection

Ignition Timing Inspection

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • The ignition timing cannot be adjusted.
  • The M-MDS is required to verify the ignition timing.
  1. Complete the engine tune-up preparation. (See ENGINE TUNE-UP PREPARATION .)
  2. Verify the ignition timing (M-MDS: SPARKADV) using the PID/data monitor function of the M-MDS.

    Ignition timing 

    Approx. BTDC 12° 

  3. Verify that ignition timing advances when the engine speed increases gradually.
scientia non olet · About LEMON Manuals