No. 31 M Position Indicator Light Does Not Illuminate In M Position/M Position Indicator Light Illuminates In D Position: Notes
WARNING: This page is about a different variant/trim than selected.
DESCRIPTION AND POSSIBLE CAUSE
| 31 |
M position indicator light dose not illuminate in M position/M position indicator light illuminate in D position |
| DESCRIPTION |
- M position indicator light in instrument cluster dose not illuminate in M position or M position indicator light in instrument cluster in D position with the ignition at ON.
|
| POSSIBLE CAUSE |
- M position switch (built-in selector lever component) or related wiring harness malfunction.
- Instrument cluster malfunction
NOTE:
- Before following the troubleshooting steps, make sure that the Automatic Transaxle On-Board Diagnostic and Automatic Transaxle Basic Inspection are conducted. (See
BASIC INSPECTION .)
|