No. 28 Gear Position Indicator Light Illuminates In P, R, N And D Position: Notes
WARNING: This page is about a different variant/trim than selected.
DESCRIPTION AND POSSIBLE CAUSE
| 28 |
Gear position indicator light illuminate in P, R, N and D position |
| DESCRIPTION |
- Gear position indicator light in instrument cluster illuminates in P, R, N and D position with the ignition at ON.
|
| POSSIBLE CAUSE |
- M position switch (built-in selector lever component), instrument cluster, or related wiring harness malfunction
NOTE:
- Before following the troubleshooting steps, make sure that the Automatic Transaxle ON-Board Diagnostic and Automatic Transaxle Basic Inspection are conducted. (See
BASIC INSPECTION .)
|