No. 27 Gear Position Indicator Light Does Not Illuminate In M Position: Notes
WARNING: This page is about a different variant/trim than selected.
DESCRIPTION AND POSSIBLE CAUSE
| 27 |
Gear position indicator light does not illuminate in M position |
| DESCRIPTION |
- Gear position indicator light in instrument cluster does not illuminate in M position with the ignition at ON.
|
| POSSIBLE CAUSE |
- M position switch (built-in selector lever component), instrument cluster, or related wiring harness malfunction
NOTE:
- Before following the troubleshooting steps, make sure that the Automatic Transaxle ON-Board Diagnostic and Automatic Transaxle Basic Inspection are conducted. (See
BASIC INSPECTION .)
|