LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Automatic Transaxle (Service, Removal & Installation FS5A-El)) >> Drive Plate Removal/Installation >> Notes

Drive Plate Removal/Installation: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transaxle. (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION .)
  2. Remove in the order indicated in the table.
  3. Install in the reverse order of removal
    PARTS DESCRIPTION CHART

    1 Drive plate installation bolts (See DRIVE PLATE INSTALLATION BOLTS REMOVAL NOTE .)
    (See DRIVE PLATE INSTALLATION BOLTS INSTALLATION NOTE .)
    2 Backing plate
    3 Drive plate
    Fig 1: Drive Plate Installation Bolts, Backing Plate And Drive Plate With Torque Specification
    G07625926Courtesy of MAZDA MOTORS CORP.