LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Automatic Transaxle (Service, Removal & Installation FS5A-El)) >> Drive Plate Removal/Installation >> Drive Plate Installation Bolts Removal Note

Drive Plate Installation Bolts Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Set the SST  against the drive plate.
  2. Loosen the drive plate installation bolts uniformly in two or three steps in the order shown in the illustration, then remove the bolts and the drive plate.
    Fig 1: Loosening Drive Plate Installation Bolts
    G07625927Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals