LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> Electrical >> Horns >> Information Center [Instrumentation/Driver Info] >> Horn Removal/Installation

Horn Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION .)
  3. Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION .)
  4. Disconnect the connectors.
  5. Remove the bolt.
  6. Remove the horn.
  7. Install in the reverse order of removal.
Fig 1: Horn, Connector And Bolt With Torque Specification
G07622522Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals