Oil Pump Preinspection
WARNING: This page is about a different variant/trim than selected.
- Measure the bushing of the oil pump. | torque converter side
Oil Pump bushing inner diameter torque converter side
Standard: 40.015-40.040 mm {1.57539-1.57637 in}
Maximum: 40.060 mm {1.57716 in}
Oil Pump bushing inner diameter forward clutch side
Standard: 19.000-19.021 mm {0.74803-0.74885 in}
Maximum: 19.041 mm {0.74964 in}
- If not as specified, replace the oil pump housing and oil pump cover. (See OIL PUMP DISASSEMBLY/ASSEMBLY .)