LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Emission System (L3 With TC)) >> Evaporative Emission (EVAP) System Leak Detection Pump Removal/Installation

Evaporative Emission (EVAP) System Leak Detection Pump Removal/Installation

WARNING: This page is about a different variant/trim than selected.
  1. Removal the charcoal canister. (See FUEL TANK SIDE ).
  2. Remove the EVAP system leak detection pump. (See FUEL TANK SIDE ).
  3. Install in the reverse order of removal.
    Fig 1: EVAP System Leak Detection Pump & Torque Specification
    G04324998Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals