LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Trunk Side Trim Removal/Installation

Trunk Side Trim Removal/Installation

  1. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
  2. Remove the fasteners, then remove the trunk side trim.
  3. Install in the reverse order of removal.
    Fig 1: Removing/Installing Trunk Side Trim
    G01344511Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals