LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Trunk End Trim Removal/Installation

Trunk End Trim Removal/Installation

  1. Remove the fasteners.
  2. Pull the trunk end trim upward, then detach clips A, locator pins B, and tabs C.
  3. Remove the trunk end trim.
  4. Install in the reverse order of removal.
    Fig 1: Removing/Installing Trunk End Trim
    G01344512Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals