LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Panels >> Front Fender Panel Removal/Installation

Front Fender Panel Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the front side marker lights. (See FRONT SIDE MARKER LIGHT REMOVAL/INSTALLATION .)
  3. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION  .)
  4. Remove the front combination lights. (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION .)
  5. Remove in the order indicated in Fig 1 .
    Fig 1: Removing Order Of Front Fender Panel
    G01344268Courtesy of MAZDA MOTORS CORP.
    Fig 2: Removing/Installing Front Fender Panel
    G01344269Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals